Installation of the CT-V01 requires a minimum of 3 wires to be connected to your vehicles electrical system.
Warning/Disclaimer: We recommend hiring a professional auto electrician to install your new GPS tracker. This guide is intended for auto electricians.
This is a no-solder, reversible install guide. However, you can solder and/or splice the wires however you like, after all, it is your vehicle.
(1) Install SIM Card
(2) Locate Wires
(3) Install The Wiring Harness
(3.1) Relay Wiring Diagram - For Engine Cut-off (Optional)
(4) Verify The Tracker Is Working
